Giv-a-Glo is a glossy surface enhancement and protective solution that takes just minutes to apply and last for weeks. It is totally water based, has no fumes, odors or hazardous ingredients.It has been formulated to replace commonly used automotive treatments that have a short lived effectiveness, leave an oily residue and are easily washed off. Giv-a-Glo does not contains oils, will not rub off on contact and will keep the coated surface clean from spills and stains. Giv-a-Glo leaves a crystal clear film and can be applied to all surfaces regardless of color.

It can be applied to hard as well as pliable surfaces including leather, vinyl and various plastic surfaces including trims, moldings, dashboards, etc. The glossy appearance will provide a water repellent, easy to clean surface that will last for several weeks. Giv-a-Glo is a general purpsoe product that can be used on internal and external surfaces that become dull and lusterless due to exposure to the sun's ultraviolet rays, everyday use and natural aging. Giv-a-Glo will enhance the appearance of the treated surfaces and prevent them from becoming hard and brittle.


Giv-a-Glo Application | Giv-a-Glo Cleanup | Additional Product Data Sheet




Giv-a-Glo

Giv-a-Glo Application

Giv-a-Glo is best applied by spraying with a mechnical trigger spray dispenser and then simply wiping the sprayed liquid over the entire surface with a soft rag or micro fiber cloth. More than one coat may be applied to increase the gloss. As Giv-a-Glo is formulated to repel liquids, the second coat should be applied before the first coat is fully dry else it may resist the second application. Giv-a-Glo will dry in 10 to 15 minutes at ambient temperature of about 78°F and low humidity. The vehicle or other coated object may be put to use after this time, provided the coated surface itself is not immediately exposed to water.

Giv-a-Glo Cleanup

Giv-a-Glo is best applied by spraying with a mechnical trigger spray dispenser and then simply wiping the sprayed liquid over the entire surface with a soft rag or micro fiber cloth. More than one coat may be applied to increase the gloss. As Giv-a-Glo is formulated to repel liquids, the second coat should be applied before the first coat is fully dry else it may resist the second application. Giv-a-Glo will dry in 10 to 15 minutes at ambient temperature of about 78°F and low humidity. The vehicle or other coated object may be put to use after this time, provided the coated surface itself is not immediately exposed to water.

Giv-a-Glo Product Data Sheet

  • Giv-a-Glo Product Data Sheet