Liquiguard PC-conc. is a concentrated pretreatment system that is designed to be diluted with water at a ratio of 1:7 (PC:Water). This water-based, polymer pretreatment system replaces commonly-used phosphates that are process-intensive, and neither eco-friendly nor biodegradable. This non-hazardous pretreatment creates a superior and more durable bond with the powder. And the final finish is smoother and more attractive because Liquiguard PC does not etch, or remove surface metal like conventional primers.

The application does not require multi-tank treatments, rinsing and passivating; and is applicable to most metals including steel, steel alloys, galvanized steel, aluminum, manganese, brass, etc. Liquiguard PC can also be used as a primer on non-metallic surfaces and hot dip galvanized surfaces. Also available in a ready to use (RTU) formula.

Some of the time and cost saving reasons to use Liquiguard PC include:
• Pre-treating with Liquiguard PC requires just two steps: cleaning and coating the part.
• Reduction in time used for pre-treatment results in better work flow and efficiency and savings.
• Large parts can be sprayed or brushed with Liquiguard PC.
• If rust spots are missed in the cleaning process, Liquiguard PC will isolate and inhibit rusting.
• Its non-toxic nature precludes the need for extra-ordinary measures in its use or disposal.
• Liquiguard PC has shown excellent tolerance in salt spray tests.

Liquiguard PC-RTU is a ready-to-use pretreatment system that requires no mixing or dilution. This water-based, polymer pretreatment system replaces commonly used phosphates that are process intensive, and neither eco-friendly nor biodegradable.

This non-hazardous pretreatment creates a superior and more durable bond with the powder. And the final finish is smoother and more attractive because Liquiguard PC does not etch, or remove surface metal like conventional primers.

The application does not require multi-tank treatments, rinsing and passivating; and is applicable to most metals including steel, steel alloys, galvanized steel, aluminum, manganese, brass, etc. Liquiguard PC can also be used as a primer on non-metallic surfaces and hot-dip galvanized surfaces. Also available in concentrate (conc.)

Some of the time and cost saving reasons to use Liquiguard PC include:
• Pre-treating with Liquiguard PC requires just two steps: cleaning and coating the part.
• Reduction in time used for pre-treatment results in better work flow and efficiency and savings.
• Large parts can be sprayed or brushed with Liquiguard PC.
• If rust spots are missed in the cleaning process, Liquiguard PC will isolate and inhibit rusting.
• Its non-toxic nature precludes the need for extra-ordinary measures in its use or disposal.
• Liquiguard PC has shown excellent tolerance in salt spray tests.